Aquaforce Pro / AQFPRO S LED2900-840 PC MB MWS

96630985

Data Sheet

An IP66, dust and moisture resistant LED luminaire. LED driver. With medium beam distribution. Class I electrical. Canopy: light grey polycarbonate. Diffuser: high transmission opal polycarbonate with refraction prisms. Patented snap-on mechanism EasyClick for clipless mounting of diffuser. For surface or suspended mounting. Quick-fix brackets supplied for surface mounting. Suitable for ceiling or wall (both vertically and horizontally). Mounting kits for conduit, chain suspension and catenary suspension are available as accessories. Suitable for through wiring with H05VV or NYM cable (rated 10A). Integral presence detector for on/off control. ambient temperature: -20°C to +45°C. Complete with 4000K LED..

Note: please contact your consultant if you are planning to use the luminaire in environments with chemical pollutants, high or condensing humidity and major variations in temperature.

Dimensions: 1100 x 92 x 90 mm
Total power: 21.5 W
Luminaire luminous flux: 2900 lm
Luminaire efficacy: 135 lm/W
Weight: 1.74 kg

Mode selection
  • Lamp position:STD - standard
  • Light Source:LED
  • Luminaire luminous flux*:2900 lm
  • Luminaire efficacy*:135 lm/W
  • Lamp efficacy:134 lm/W
  • Colour Rendering Index min.:80
  • Correlated colour temperature*:4000 Kelvin
  • Chromaticity tolerance (initial MacAdam)*:3
  • Rated median useful life*:50000h L80 at 25°C
  • Ballast:1x LED_DRV LC
  • Luminaire input power*:21.5 W Power factor = 0.96
  • LED
  • CE
  • D
  • ENEC11
  • Food
  • 850°
  • Hfree
  • IK08
  • IP66
  • Electrical class I
  • Ta = -20 to +45

Photometry

Photometric configuration

CalcExpress

Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
(lm)
(m)
(m)
(%)
Step 2: Room Data
(m)
(m)
(m)
(m)
(%)
Step 3: Result
(lx)
(%)