Chalice 3 / CHAL3 150 3000-840 HFIX E3 RSB

93901257

Data Sheet

A high efficient and sustainable LED downlight with low height. Suitable for mounting in ceiling thicknesses of 1 to 40 mm and Ø150mm cut-out with spring clips. Remote, pluggable, DALI-2 dimmable LED driver NFC configurable, SwitchDIM compatible with 3 hour, manual test, emergency lighting circuit. Body: die-cast aluminium for high efficient thermal management with recycling content >90%. Diffuser: polycarbonate. Reflector and trim: polycarbonate smooth reflector in satinbrite finish with wide beam. Class II electrical, IP54_IP20. Complete with 4000K LED

Installation in concrete ceilings not permitted.

Dimensions: Ø174 x 94 mm
Luminaire input power: 30.2 W
Luminaire luminous flux: 3130 lm
Luminaire efficacy: 104 lm/W
Weight: 1.14 kg

Mode selection
  • Lamp position:STD - standard
  • Light Source:LED
  • Luminaire luminous flux*:3130 lm
  • Total emergency luminous flux:360 lm
  • Luminaire efficacy*:104 lm/W
  • Colour Rendering Index min.:80
  • Ballast 1:1 x 28005148 LC 25/200-650/38 o4a NF SR EXC3 Z
  • Ballast 2:1 x 89801167 EM TR cPK BASIC SLIM w/o Battery
  • Correlated colour temperature*:4000 Kelvin
  • Chromaticity tolerance (initial MacAdam):3
  • Rated median useful life*:L90 50000 h at 25 °C
  • Luminaire input power*:30.2 W Power factor = 0.97
  • Dimming:Dali2Dim dimmable to 1%
  • Maintenance category CIE 97:C - Closed Top Reflector
  • LED
  • CE
  • NoIsol
  • GLedReP
  • 850°
  • Hfree
  • IK09
  • IP54-IIP20
  • LLedReP
  • RG1
  • SC2 - Protection Class 2
  • Ta=25
  • UKCA

Photometry

Photometric configuration

CalcExpress

Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
(lm)
(m)
(m)
(%)
Step 2: Room Data
(m)
(m)
(m)
(m)
(%)
Step 3: Result
(lx)
(%)