Product Finder

Altis Gen4

  • Altis Gen4
  • Altis Gen4

High power LED floodlight for sports (from high tier down to recreational fields) and area lighting applications

  • BEST-IN-CLASS LIGHT QUALITY for sports and area lighting, from horizontal for reduced obtrusive light
  • Optical flexibility and modular construction enabling various combinations of optics, including the possibility to tilt each single LED module to minimise the number of luminaires and optimize the windage.
  • Superior performance thanks to a compact gearbox installed in every condition (back of the luminaire up to 200 m remotely), providing the highest performance for all installations.
  • Fully controllable solution via Dali or DMX RDM enabling instant lighting, stepped illumination levels and event lighting with dynamic lighting scenarios.
  • Intuitive design for an ease of the installation process, with a quick fix connection box, as well as the multi-positionning fixations. Adjustable precision setting for accurate and fast brick tilting and orientation.

Materials and Finish

Body : die-cast aluminium painted dark sandy grey (close to RAL 7043)
Frame and stirrup : die-cast aluminium or sheet aluminium with very low copper content, painted dark sandy grey (close to RAL 7043)
Glass: 4mm toughened with anti-reflecting coating
Screws: stainless steel

Installation and Mounting

Stirrup fixed using different fixation points (one M20 screw or two M14 screws). Frame fixed to stirrup with M10 Hex screw with the possibility to move (100mm) the position horizontally (available only on 3 and 2 LED modules version). Tiltable LED modules fixed on frame via M8 Hex screws. Reversable stirrup allows hang down position and different mounting configurations including suspension, wall mounting, surface mounting, roof mounting. The LED modules are pre-wired to a distribution box with an easy clamping connection system.
Gearbox can be installed remotely up to 200m far from the luminaire and equipped with four different cable glands - 1 x M25 cable gland accepting cable diameter between 10 mm and 17 mm and wiring with plug-in terminals for wires up to 2,5mm² for mains supply (200-440V / 50÷60Hz), 2 x M16 cable glands accepting cable diameter between 5 mm and 10 mm for control IN/OUT and 1xM32 cable gland accepting cable diameter between 13 mm and 21 mm wiring with plug-in terminals for wires up to 2,5mm² (one cable of 7-cores at length of customer choice not supplied by Thorn and used for electrical connection to the floodlight - 8-cores for the use of the NTC) – and LED signal to indicate the status of the gearbox. Four holes in power supply housing corners allow different mounting options.
Precision aiming device available and adjustable on top or bottom of LED module.

  • New Product
New Product
LumExpress Product
eControl Product

Altis, 1 module

Description   TypeWt (kg)SAP Code
ALG4 144L105-740 PST NB ANTLED9.2896672072
ALG4 144L120-740 PST NB ANTLED9.2896672071
ALG4 144L70-740 PST NB ANTLED9.2896672074
ALG4 144L85-740 PST NB ANTLED9.2896672073

Altis, 2 modules

Description   TypeWt (kg)SAP Code
ALG4 288L105-740 PST NBNB ANTLED23.3096679378
ALG4 288L120-740 PST NBNB ANTLED23.3096671519
ALG4 288L70-740 PST NBNB ANTLED23.3096679380
ALG4 288L85-740 PST NBNB ANTLED23.3096679379

Altis, 3 modules

Description   TypeWt (kg)SAP Code
ALG4 432L105-740 PST NBNBNB ANTLED30.9096679375
ALG4 432L120-740 PST NBNBNB ANTLED30.9096671499
ALG4 432L70-740 PST NBNBNB ANTLED30.9096679377
ALG4 432L85-740 PST NBNBNB ANTLED30.9096679376

Altis, gearbox

Altis Accessories