High power RGBW and Balanced White colour changing LED floodlight for events and architectural lighting
- High performance lighting up to 55 klm (RGBW) and 80 klm (BW) with exceptional environmental resistance, excellent thermal and windage properties as well as a wide choice of outputs and precision optics
- INDIVIDUAL MODULE AIMING - Optical flexibility and modular construction enabling various combinations of optics, including individual module tilting to minimize the number of luminaires and optimize the windage
- Excellent performance with the compact gearbox installed either on the frame of the luminaire or up to 200m remotely
- Fully controllable solution via DALI and DMX-RDM enabling instant lighting, stepped illumination levels and event lighting with dynamic lighting scenarios. RGBW uses a dual-control DALI/DMX-RDM gearbox
- Intuitive design for an ease of installation, with a quick fix connection box (Balanced White only), as well as multiple fixing options. Adjustable precision setting for accurate and fast module tilting and orientation
- To ensure suitability for your project applications, please use myProduct to configure the required version. Your local Sales Team can assist with this process
Materials and Finish
Body: die-cast aluminium EN AC-44300 modules with patented 'pin fins' for maximum thermal management, powder coated paint finish.
RGBW - 1, 2 and 3 modules.
Balanced White (BW) - 2 modules only.
Frame and stirrup : die-cast aluminium EN AC 44100 or fabricated sheet aluminium painted (all versions) or unpainted (2 & 3 module stirrup versions).
Aluminium: low copper content, suitable for use in harsh environments including swimming pools (gearbox to be mounted outside pool hall).
Glass: 4mm toughened, high transmission glass with anti-reflective treatment on both faces.
Screws: zinc coated stainless steel A4 grade.
Corrosion resistance: protected to classification C5 according to ISO 9223:2012.
Installation and Mounting
Bracket mounted using different fixing points (one M20 screw or two M14 screws). Frame fixed to stirrup with M10 Hex screw with the possibility to move (100mm) the position horizontally (available only on 3 and 2 LED modules stirrup version). Tiltable LED modules fixed on frame via M8 Hex screws. Reversable stirrup allows 'under slung' mounting and different mounting configurations including suspension, wall mounting, surface mounting, roof mounting. The LED modules are pre-wired to a distribution box (Balanced White only) with an easy clamping connection system. RGBW versions supplied with male and female connectors.
A separately supplied gearbox can be installed remotely up to 200m from the luminaire and is equipped with three cable glands - 1 x M25 cable gland accepting cable diameter between 10 mm and 17 mm and wiring with plug-in terminals for wires up to 2,5mm² for mains supply (220-400V / 50-60Hz), 1 x M20 cable gland accepting cable diameter between 6 mm and 11 mm for control IN/OUT and 1xM25 cable gland accepting cable diameter between 10 mm and 17 mm wiring with plug-in terminals for wires up to 2,5mm² (one cable at length of customer choice not supplied by Thorn and used for electrical connection to the floodlight) – and LED signal to indicate the status of the gearbox. Four holes in power supply housing corners allow different mounting options, in accordance with the installation instructions.
A connection / junction box is included with 2 module versions (Balanced White only).
A precision aiming device is available and adjustable on the top or bottom of each LED module.
